About this item

• Specification: Material: TPU Rubber, Stainless Steel; Color: Black; Bolt Thread Size: M10, 25mm/0.98inches; Base Size: 103x103mm/4.06x4.06inches(LxW); Height: 81mm/3.19inches; Height (Without Base): 61mm/2.4inches; Support Weight Range: ≤1000lbs; Suitable Range: 1P/1.5P/2P/3P/5P Air Conditioner; Package List: 4Pcs x Mounting Rubber Pads Bracket
• The mounting rubber pads bracket is used as an anti-vibration pad, anti-skid pad, and sound-absorbing pad. The mounting rubber pads bracket fits most of mini split air conditioner condensers, as well as heat pump systems or other heavy machines outdoor or indoor use.
• Advantage:1. The mounting rubber pads bracket is made of TPU rubber material, which has a detailed texture design, anti-slip, sturdy, durable for use. The stainless steel bolt is rust-proof, making it work stably even in humid environments. 2. The rubber base can reduce vibration, extending the life of the machine, reducing the noise caused by vibration to give family a good sleep. 3. Installing the rubber bracket can raise the height of the machine from the ground to isolate snow or wet ground.
• Instruction: Easy to use. Just put the leg holes of the machine into the screw accurately and tighten the nuts with appropriate tools to form a stable anti-vibration structure.
• NOTE: Please check the size before purchasing.

About this item

• 10 ft Line Set: The mini split line set is 10ft in length, with no leaks with high and low-pressure twin lines. The diameter for the copper tubes is 1/4"(6.35mm) and 3/8" (9.52mm), The thickness of copper tubes: is 0.6mm, which fits most mini-split air conditioners.
• Mini Split Line Set: The line extension for the split unit is made of good quality copper, corrosion-resistant and durable, any gas won't leak out. The copper line set is structured by three-layer insulation cotton, which saves bills energy-saving for air conditioning and protects the copper pipe against wind, sunlight, and fire. Thickened anti-cracking nuts are anti-freeze, pre-flared ends for easy installation. The two-in-one design makes the line set easy to bend.
• Application: This mini split line set is suitable for most 0-9000 BTU mini split air conditioners or heat pumps. Choose the right specification to fit your air conditioning.
• Easy Installation: With pre-flared ends and brass nuts, the copper line set can be installed on the air conditioner directly. In addition, you can cut to the desired length to meet your needs.
• Package Included: 10 ft/3meter Mini split line x 1, 13 ft/4meter Drain pipe x 1, 11.5 ft/3.5meter Interconnecting cable x 1, Decorative wall cap x 1, Pipe insulation straps x 2, Wall sleeve cylinder x 1, Wall filler putty x 2.

About this item

• Specification: Size: 33 x 90 x 60 mm/1.3 x 3.5 x 2.4 inch(H*OD*ID); Fit Hole Diameter: 60 mm -69 mm/2.4 Inch -2.7 Inch; Material: Polypropylene; Finish: Polishing; Packing List: 4 Pcs x Round Vent Cover
• Advantage: The air conditioning wall hole cover is made of polypropylene which is thick, durable, corrosion resistant, wear resistant, easy to clean, and can be used for a long time; Buckle design strengthens the installation, preventing the cover from falling off; The middle cover is designed to be easily removable. You can open the cover when you need to install a pipe, and you can use the cover to block it when you don't need to install a pipe.
• Application: The air conditioning wall hole cover is widely used in bedrooms, bathrooms, kitchens, living rooms, offices, and warehouses. They can be used for the decoration or covering of heating pipes, water pipes, drain pipes, or covering of round holes.
• Instruction: The middle cover can be easily removed when you need to install a pipe. Just push the middle of the cover outwards with your hand; To achieve better covering and sealing effects, please use some sealant clay around the connection.
• Note: Please confirm the diameter of the hole and choose the appropriate size before purchasing.

• Color: Black; Material: Rubber; Inner Diameter: 11mm / 0.43 inch; Total Size: 36 x 29mm / 1.4 x 1.1 inch(OD*H); Package List: 4 x Feet Pads
• Advantage: Rubber isolator mounts are not easy to deform and corrosion has good elastic properties and long service life. This absorber shock is stable and convenient to position and can be well-supported during use. Feet mount can avoid directly contact between the machine and the ground to produce marks, reduce the machine's vibration and noise during operation, and has good vibration isolation performance.
• Instruction: The installation is simple, and the corners of the machine can be directly inserted into the foot pad.
• Application: This foot pad is mainly used in household or outdoor air conditioners, refrigerators, generators, and compressors, supporting and achieving the effect of anti-vibration and noise reduction during the use of the machine. Feet mount can also be used in computer desk mats, sofa cushions, cabinets, etc.
• Note: Pay attention to the inner diameter of the feet pad according to your need before ordering.