About this item

• Drying and Overlaying Time: [44°F (20°C)] Drying Time: Approx. 1 hour; Coat Weight: Approx. 4 hours; Winter Season: Dry Time: Approx. 2 hours; Coating Area: Approx. 6 hours; Coverage (2 coats); [0.7 L] Approx. 2.5 – 3.5 m² (2.5 – 3.5 m²) Tatami (1.8 – 1.8 – 1.8 – 1.8 m²) 1.6L Tatami Size: Approx. 5 – 8 m² (5 – 8 m²); Tatami Size: Approx. 4 sheets [3 L]; Approx. 10 – 15 m²; Tatami Width: Approx. 8 sheets [7 kg]; Approx. 22 – 32 m²; Tatami Size: Approx. 16 sheets [14 kg]. About 45~ 64 m² Tatami Width: Approx. 33 sheets
• [Features] Heat shielding pigments (special thermal shielding pigments, infrared reflective pigments) + acrylic silicone resin (forming a strong coating film against acid rain, salt damage, ultraviolet rays, exhaust gases, etc.). Silver and black does not contain infrared reflective pigments. ■ Infrared reflective pigment reflects infrared rays, lowers the upper layer of roof surface temperature up to 18°C – 4°C). (Compare to our previous paints) The acrylic and silicone resin formula creates a coating film that is resistant to dirt such as acid rain, salt damage, UV rays, exhaust gas, and other contaminants to keep the building looking beautiful. ■ Heat shielding effect prevents heat deterioration compared to traditional paint. ■ Excellent water resistance to protect your roof from rain water. ■ Quick-drying, low odor, safe and environmentally friendly water-based paint. ■ Strong anti-mold formula prevents mold from forming for a long time. ■ Quick-drying properties help shorten time and work processes. ■ Use water-based silicone for thermal shielding roofs, sold separately, to further increase the thermal insulation effect
• [Use] Do not use for anything other than its intended purpose. ■ [Roof] Cement Tiles / Slate Tiles / Galvanized Tiles (Color Best / Colonial etc.) *The new tin has poor paint adhesion, so after leaving it for half a year, the surface will be gone, and then apply a primer of one of the following before applying a top coating. 1. Our product is “Anti-Rust Series(Water-based or Oil-Based Product): Effect / Rust Resistant. 2. Our product is “water-based silicone primer for heat shielding roofs”: Effectiveness / Rust prevention & heat shielding effect greatly improved. When applying to tiles, please use our “oil-based seal sealer” before using a special primer (Except new and new tiles. Wood, iron parts: Building materials / plywood, etc. [Can’t be painted] [Tiles] Glazed tiles, unglazed clay tiles, glazed cement tiles, glazed concrete tiles, dried western tiles (moniel tiles), single tiles, natural stone tiles, [Plate] galvalum steel plates, PVC steel plates, fluorine steel plates, copper plates, stainless steel, aluminum plates, resin plates. Please check it before using
• [Precautions when painting]: Fill with caulk material or quick drying cement, and leave it as flat as possible. Please note that there are caulking materials that cannot be painted with paint. Please do not fill the gap between the overlapping and the gaps of the tiles with caulking material or paint. This may cause water drainage and rain leakage. ■ The surface with suction may be difficult to shine through. After drying, apply more. ■ The color after painting is different from the color samples (Neo Black, etc.), but when dry, the color will be the same as the sample. ■ Oil-based adhesive sealer may invade caulking material and may not be able to apply the coat well. Use caulk after painting an oil seal sealer ■ Work as early as possible in the summer and paint before the surface of the roof gets hot in direct sunlight. The tiles become hot and the bubbles are easy to blow away. When applying to hot tiles, dilute about 5% more with water. ■ Wet or wet paint surface will slow dry and cause paint abnormalities. If you get in rain or wash with water, let it dry for a day or more before painting
• [Dilute Solution / Tool Cleaning] Water (dilute within 5% only when it becomes hard to paint)