About this item

• Color: White; Material: Plastic; Suitable for 27mm Drain Outlet Hole.; Diameter (Connecting Hose Size):16mm/0.63"; Connector Size: 47x53mm / 1.9x2.1Inch (L*W); Packing List: 4 x Hose Connector, 4 x Clamp
• Advantage: This connector is made of durable plastic material, is not easy to age, can be well connected with faucets and water pipes, and has a long service life. Moreover, it is light and compact, convenient for you to carry it out. The package comes with a clamp, which can help you quickly complete the installation without other tools.
• Instruction: 1. Connect the water drain hose (not included) with the drain connector and fix it with clamp. 2. Connect the drain connector to the drain outlet of the air conditioner.
• Application: The drain connector is installed at the bottom of the mini-split AC outdoor unit or window-type AC unit for proper drainage while preventing water leakage, suitable for AC units in different brands as long as the dimension of the drain outlet is matched, can be applied to water faucets, washing machines, etc., widely used in home, hotels, offices and so on.
• Note: Please pay attention to measuring the diameter of the air conditioner drain outlet before purchasing.

• Color: White; Diameter: 115 x 82 mm / 4.53 x 3.23 inch; Fit for Hole Diameter: 82-89 mm / 3.2-3.5 inch
• Overall Height: 41mm / 1.61 inch; Mounting Thickness: 35mm / 1.38 inch; Packing List: 1 Pcs x Air Conditioning Wall Hole Cover
• Advantage: The air conditioning wall hole cover is made of polypropylene which is thick, durable, corrosion resistant, wear resistant, easy to clean, and can be used for a long time; Buckle design strengthens the installation, preventing the cover from falling off; The middle cover is designed to be easily removable. You can open the cover when you need to install a pipe, and you can use the cover to block it when you don't need to install a pipe.
• Instruction: The middle cover can be easily removed when you need to install a pipe. Just push the middle of the cover outwards with your hand; To achieve better covering and sealing effects, please use some sealant clay around the connection.
• Application: The air conditioning wall hole cover is widely used in bedrooms, bathrooms, kitchens, living rooms, offices, and warehouses. They can be used for the decoration or covering of heating pipes, water pipes, drain pipes, or covering of round holes.

About this item

• 10 ft Line Set: The mini split line set is 10ft in length, with no leaks with high and low-pressure twin lines. The diameter for the copper tubes is 1/4"(6.35mm) and 3/8" (9.52mm), The thickness of copper tubes: is 0.6mm, which fits most mini-split air conditioners.
• Mini Split Line Set: The line extension for the split unit is made of good quality copper, corrosion-resistant and durable, any gas won't leak out. The copper line set is structured by three-layer insulation cotton, which saves bills energy-saving for air conditioning and protects the copper pipe against wind, sunlight, and fire. Thickened anti-cracking nuts are anti-freeze, pre-flared ends for easy installation. The two-in-one design makes the line set easy to bend.
• Application: This mini split line set is suitable for most 0-9000 BTU mini split air conditioners or heat pumps. Choose the right specification to fit your air conditioning.
• Easy Installation: With pre-flared ends and brass nuts, the copper line set can be installed on the air conditioner directly. In addition, you can cut to the desired length to meet your needs.
• Package Included: 10 ft/3meter Mini split line x 1, 13 ft/4meter Drain pipe x 1, 11.5 ft/3.5meter Interconnecting cable x 1, Decorative wall cap x 1, Pipe insulation straps x 2, Wall sleeve cylinder x 1, Wall filler putty x 2.

About this item

• Material: Galvanized Iron; Color: Silver; Thickness: 0.7mm / 0.03 inch; Total Size: 202x73x15mm / 7.95 inch x 2.87 inch x 0.59 inch (L*W*H); Suitable for 1-3P (9000~26000BTU) wall-mounted internal unit; Package Content: 2 Pair(4pcs) x Air Conditioner Wall Mount Bracket; 20 x Screws
• Advantage: Made of galvanized iron material, strong and rust resistant, long service life. The mounting hole position design makes the installation process simple and easy, while effectively reducing noise Firm and stable, the support bracket will not shake or fall during use, ensuring safety and stability.
• Instruction: 1. Measuring the center hole distance of the air conditioner indoor unit. 2. Mark the center distance on the wall with a pen and ruler. 3. Place our bracket plate on the mark just now and mark the 4 screw holes on the wall. 4. Drill 4 screw holes on the wall according to the mark just now.
• Application: This hanging plate can be used for different brands and models of air conditioning indoor units, making it a universally adaptable product. It fits the air conditioner indoor units with 1P to 3P(9000TBU~26000BTU).
• Note: Please check the size of your air conditioner to make sure it will fit.