About this item

• 10 ft Line Set: The mini split line set is 10ft in length, with no leaks with high and low-pressure twin lines. The diameter for the copper tubes is 1/4"(6.35mm) and 3/8" (9.52mm), The thickness of copper tubes: is 0.6mm, which fits most mini-split air conditioners.
• Mini Split Line Set: The line extension for the split unit is made of good quality copper, corrosion-resistant and durable, any gas won't leak out. The copper line set is structured by three-layer insulation cotton, which saves bills energy-saving for air conditioning and protects the copper pipe against wind, sunlight, and fire. Thickened anti-cracking nuts are anti-freeze, pre-flared ends for easy installation. The two-in-one design makes the line set easy to bend.
• Application: This mini split line set is suitable for most 0-9000 BTU mini split air conditioners or heat pumps. Choose the right specification to fit your air conditioning.
• Easy Installation: With pre-flared ends and brass nuts, the copper line set can be installed on the air conditioner directly. In addition, you can cut to the desired length to meet your needs.
• Package Included: 10 ft/3meter Mini split line x 1, 13 ft/4meter Drain pipe x 1, 11.5 ft/3.5meter Interconnecting cable x 1, Decorative wall cap x 1, Pipe insulation straps x 2, Wall sleeve cylinder x 1, Wall filler putty x 2.

About this item

• Material: Galvanized Iron; Color: Silver; Thickness: 0.7mm / 0.03 inch; Total Size: 202x73x15mm / 7.95 inch x 2.87 inch x 0.59 inch (L*W*H); Suitable for 1-3P (9000~26000BTU) wall-mounted internal unit; Package Content: 2 Pair(4pcs) x Air Conditioner Wall Mount Bracket; 20 x Screws
• Advantage: Made of galvanized iron material, strong and rust resistant, long service life. The mounting hole position design makes the installation process simple and easy, while effectively reducing noise Firm and stable, the support bracket will not shake or fall during use, ensuring safety and stability.
• Instruction: 1. Measuring the center hole distance of the air conditioner indoor unit. 2. Mark the center distance on the wall with a pen and ruler. 3. Place our bracket plate on the mark just now and mark the 4 screw holes on the wall. 4. Drill 4 screw holes on the wall according to the mark just now.
• Application: This hanging plate can be used for different brands and models of air conditioning indoor units, making it a universally adaptable product. It fits the air conditioner indoor units with 1P to 3P(9000TBU~26000BTU).
• Note: Please check the size of your air conditioner to make sure it will fit.

• Color: Black; Material: Rubber; Inner Diameter: 11mm / 0.43 inch; Total Size: 36 x 29mm / 1.4 x 1.1 inch(OD*H); Package List: 4 x Feet Pads
• Advantage: Rubber isolator mounts are not easy to deform and corrosion has good elastic properties and long service life. This absorber shock is stable and convenient to position and can be well-supported during use. Feet mount can avoid directly contact between the machine and the ground to produce marks, reduce the machine's vibration and noise during operation, and has good vibration isolation performance.
• Instruction: The installation is simple, and the corners of the machine can be directly inserted into the foot pad.
• Application: This foot pad is mainly used in household or outdoor air conditioners, refrigerators, generators, and compressors, supporting and achieving the effect of anti-vibration and noise reduction during the use of the machine. Feet mount can also be used in computer desk mats, sofa cushions, cabinets, etc.
• Note: Pay attention to the inner diameter of the feet pad according to your need before ordering.