About this item

• Fits for many PRS, many other guitars that use the classic wraparound single bridge/tailpiece
• 52mm String spacing, 82mm post spacing, post is standard metric sized M8 thread and 12mm outside diameter for post bushing
• Adjustable compensated D and G string and a adjustable post set screws for much easier intonation, the bridge delivers a rich tone
• Genuine Wilkinson parts, made in Korea. Note: This bridge is made of Zinc alloy, NOT Aluminum. In fact, this bridge does not use Aluminum anymore after 2017 year, there is not an Aluminum version now.
• Included studs and hex wrench

• Fits for Squier Strat style electric guitar with thin body, 6-screw style design, please check your guitar size before you buy
• String spacing: 52.5mm (2-1/16 inch), mounting screw holes spacing: 52.5mm (2-1/16 inch)
• Vintage style steel bent saddles, steel plate, 36mm tall solid brass block brings better sustain, 5.8mm Threaded-in steel tremolo arm
• Full metal diecast construction, well finished, good option to upgrade your guitar
• Package included: 1 full set of tremolo bridge and mounting accessories

About this item

• Good replacement for older non-adjustable bridge/tailpiece combos very similar to the discontinued guitar bridge, you can use it to upgrade your Epiphone Les Paul junior or Special etc.
• String spacing: 52.5mm (2-1/16"), Spacing studs center to center: 81.7mm (3-7/32 "), Stud outside diameter: 12mm(15/32 "), Thread studs: M8, please check your guitar before you buy
• Bridge height on flat surface to top of center saddle is 16.6mm(21/32 "),12 inch radius saddles,saddles have a standard center notch
• Fully adjustable,Made of zinc , full metal diecast construction-very nice and solid- Sustain is awesome, get your guitar in tune
• Package includes: 1 piece guitar bridge assembly set and mounting accessories

About this item

• Fits electric guitar, bridge position
• Traditional soapbar type P90 single coil pickup, the dual Alnico 5 bar magnets and the short, wide bobbins give the P90 its unique tonal character with a powerful midrange and higher output than most other types of single coils. This pickup has sparkly mids that really give it a gritty, open tone. Chords have a nice harmonic bloom, and single notes are glassy and up-front
• Polepiece spacing: 52mm (2-3/64 inch), mounting screw holes spacing: 21mm(53/64 inch)
• Resistance: 9.5K, inductance: 7.5H. Tolerance: 0.5K for single coil, 1K for humbucker. The resistance value will change according to temperature and humidity. Usually, the resistance value will be high in hot and dry weather, be low in cold and wet weather. In extreme cases, the resistance value tolerance will be greater. Magnet: Alnico 5; nickel silver baseplate; polepiece: adjustable screws; ABS plastic bobbin, PC cover, wiring: 1P Shield (metal braided wires)
• Package includes: 1pc pickup and mounting accessories. Note: Our screws maybe will not fit your usage, please use your own if you can

About this item

• Musiclily is official distributor of The Revival Pickups. Fits electric guitar, neck and bridge position
• Our Hotwired Humbucker Set is what many would call the key to the "Brown" sound. Both neck and bridge pickups are fitted with Alnico 5's. The neck pickup is often described as being harmonically rich, and full-bodied sounding that will handle anything from blues to rock with even more power to spare. The high-output bridge pickup can take you anywhere from blues rock to screaming shred metal solos
• The Hotwired was designed originally for humbucker plays who play a lot with their volume knobs as these were designed to clean up or break up at whenever is necessary
• String spacing: the neck is 50mm (1-31/32 inch), the bridge is 52mm (2-3/64 inch), mounting screw holes spacing: 78mm (3-5/64 inch). Resistance: 8K (neck) and 17.5K (bridge), tolerance: 0.5K; wiring: 4P Shield
• Package includes: 2 pieces pickups and mounting accessories. Note: Our screws maybe will not fit your usage, please use your own if you can

About this item

• CTS pots have long been the first choice in American guitars, fits most USA electric guitars and basses like ST, TL, LP, SG
• Fine 24-spline split shaft imperial sized pots for American-made guitar knobs, split shaft diameter: 6mm (15/64 inch), thread diameter: 9.5mm (3/8 inch), thread height: 9.5mm (3/8 inch)
• Linear taper, resistance: 500K, tolerance: 10%. Aluminum shaft and bushing
• Features low noise, robust construction, proprietary anti-static lube, smooth feel, reduced shaft wobble, tinned solderable cover. 500K usually used for humbuckers, remains more high-end frequencies, gives brighter tone than 250K
• Package includes : 4 pieces potentiometers, locking washers, washers, nuts