About this item

• Color: Black; Material: Rubber; Inner Diameter: 11mm / 0.43 inch; Total Size: 31 x 17mm / 1.2 x 0.7 inch(OD*H); Package List: 8 x Feet Pads
• Advantage: Rubber isolator mounts are not easy to deform and corrosion has good elastic properties and long service life. This absorber shock is stable and convenient to position and can be well-supported during use. Feet mount can avoid directly contact between the machine and the ground to produce marks, reduce the machine's vibration and noise during operation, and has good vibration isolation performance.
• Instruction: The installation is simple, and the corners of the machine can be directly inserted into the foot pad.
• Application: This foot pad is mainly used in household or outdoor air conditioners, refrigerators, generators, and compressors, supporting and achieving the effect of anti-vibration and noise reduction during the use of the machine. Feet mount can also be used in computer desk mats, sofa cushions, cabinets, etc.
• Note: Pay attention to the inner diameter of the feet pad according to your need before ordering.

• Color: White; Diameter: 115 x 82 mm / 4.53 x 3.23 inch; Fit for Hole Diameter: 82-89 mm / 3.2-3.5 inch
• Overall Height: 41mm / 1.61 inch; Mounting Thickness: 35mm / 1.38 inch; Packing List: 1 Pcs x Air Conditioning Wall Hole Cover
• Advantage: The air conditioning wall hole cover is made of polypropylene which is thick, durable, corrosion resistant, wear resistant, easy to clean, and can be used for a long time; Buckle design strengthens the installation, preventing the cover from falling off; The middle cover is designed to be easily removable. You can open the cover when you need to install a pipe, and you can use the cover to block it when you don't need to install a pipe.
• Instruction: The middle cover can be easily removed when you need to install a pipe. Just push the middle of the cover outwards with your hand; To achieve better covering and sealing effects, please use some sealant clay around the connection.
• Application: The air conditioning wall hole cover is widely used in bedrooms, bathrooms, kitchens, living rooms, offices, and warehouses. They can be used for the decoration or covering of heating pipes, water pipes, drain pipes, or covering of round holes.

About this item

• 10 ft Line Set: The mini split line set is 10ft in length, with no leaks with high and low-pressure twin lines. The diameter for the copper tubes is 1/4"(6.35mm) and 3/8" (9.52mm), The thickness of copper tubes: is 0.6mm, which fits most mini-split air conditioners.
• Mini Split Line Set: The line extension for the split unit is made of good quality copper, corrosion-resistant and durable, any gas won't leak out. The copper line set is structured by three-layer insulation cotton, which saves bills energy-saving for air conditioning and protects the copper pipe against wind, sunlight, and fire. Thickened anti-cracking nuts are anti-freeze, pre-flared ends for easy installation. The two-in-one design makes the line set easy to bend.
• Application: This mini split line set is suitable for most 0-9000 BTU mini split air conditioners or heat pumps. Choose the right specification to fit your air conditioning.
• Easy Installation: With pre-flared ends and brass nuts, the copper line set can be installed on the air conditioner directly. In addition, you can cut to the desired length to meet your needs.
• Package Included: 10 ft/3meter Mini split line x 1, 13 ft/4meter Drain pipe x 1, 11.5 ft/3.5meter Interconnecting cable x 1, Decorative wall cap x 1, Pipe insulation straps x 2, Wall sleeve cylinder x 1, Wall filler putty x 2.

About this item

• Specification: Material: Stainless Steel, Plastic; Color: Silver Red; Total Size: 205 x 60mm/ 8.1 x 2.4inch (LxW); Handle Length: 115mm/4.5inch; Package List: 1 x Air Conditioner Fin Comb
• This fin comb can straighten bent fins in a few seconds, helping to maintain airflow and keeping the engine cool. Fin comb can clean the dust on the condenser and straighten it when deformed.
• Advantage: Our fin comb is made of quality stainless steel, is durable for use, making it suitable for cleaning and straightening various types of air conditioning units. Its plastic threaded handle design makes it non-slip, increasing friction to prevent slipping during work.With its compact design, this fin straightener tool is easy to use and provides a firm grip for efficient operation. It easily fits into any toolbox or storage compartment for quick and convenient access.
• Instruction: The red hoop can be adjusted freely, when using the fin comb, pull the white hoop forward and then place it into the air conditioner to clean the dust, good for cleaning dust of air conditioner condenser fins to maintain the AC system stably work.
• NOTE: If the air conditioner fin comb is deformed, first carefully separate them with a tool, and then use a comb to insert and tidy them up slowly.